The Ranch Zone
King Ranch Ag & Turf
The Ranch Zone
Search Our Inventory: Row Crop Tractor
Search Our Inventory: John Deere 5075E
Search Our Inventory: Skid Steers
Search Our Inventory: John Deere 8370R
Search Our Inventory: Frontier Rotary Cutter
Search Our Inventory: Cotton Picker
Search Our Inventory: Lawn Mower
Search Our Inventory: John Deere Gator
Search Our Inventory: Tillage
Search Our Inventory: Zero-Turn Mower

John Deere 4045TF285 4.5L Generator Drive Engine

Model Photo

4045TF285

• PowerTech™ E
• Standby: 74 kW (99 hp) @ 1800 rpm
• Prime: 67 kW (90 hp) @ 1800 rpm

 

Features

2-valve cylinder head

  • Cross-flow head design provides excellent breathing from a lower-cost 2-valve cylinder head

High-pressure common-rail (HPCR) and engine control unit (ECU)

  • The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures, up to 1600 bar (23,000 PSI). It also controls fuel injection timing and provides precise control for the start, duration, and end of the injection

Fixed geometry turbocharger

  • Fixed geometry turbochargers are precisely matched to the power level and application

Turbocharged

  • In turbocharged engines, the air is pre-compressed. Due to the higher pressure, more air is supplied into the combustion chamber allowing a corresponding increase in fuel injection which results in greater engine output

Multiple injection strategy

  • The new HPCR fuel system and engine control unit (ECU) allow for multiple fuel injections. The number of fuel injections, based on speed and load, help contribute to lower combustion temperatures, which reduce the formation of NOx and particulates. The multiple injection strategy also provides an added benefit of noise reduction

John Deere electronic engine controls

  • Electronic engine controls monitor critical engine functions, providing warning and/or shutdown to prevent costly repairs and eliminate the need for add-on governing components, all lowering total installed costs.

Compact size

  • Mounting points are the same as Tier 2/Stage II engine models

Engine performance

  • Block loading capability provided with standard electronic governor control

Additional features

  • Self-adjusting poly-vee fan drive
  • Forged-steel connecting rods
  • Replaceable wet-type cylinder liners
  • Either-side service
  • 500-hour oil change

Emissions Certifications

EPA Tier 3  

General engine data

Model 4045TF285
Number of cylinders 4
Displacement-- L (cu in) 4.5 (275)
Bore and Stroke-- mm (in) 106 x 127 (4.17 x 5.00)
Compression Ratio 19.0:1
Engine Type In-line, 4-Cycle
Aspiration Turbocharged
Length - mm (in) 860 (33.9)
Width-- mm (in) 612 (24.1)
Height-- mm (in) 1039 (40.9)
Weight, dry - kg (lb) 491 (1083)

Performance data range

Hz (rpm) 60 ( 1800 )
Generator Efficiency % 88-92
Power Factor 0.8
Engine power - Prime kW 67
Engine power - Prime hp 90
Engine power - Standby kW 74
Engine power - Standby hp 99
Rated Fan Power - kW 5.2
Rated Fan Power - hp 7
Calculated generator set output - Prime kWe 54-57
Calculated generator set output - Prime kVA 68-71
Calculated generator set output - Standby kWe 61-63
Calculated generator set output - Standby kVA 76-79