Search Our Inventory: Row Crop Tractor
Search Our Inventory: John Deere 5075E
Search Our Inventory: Skid Steers
Search Our Inventory: John Deere 8370R
Search Our Inventory: Frontier Rotary Cutter
Search Our Inventory: Cotton Picker
Search Our Inventory: Lawn Mower
Search Our Inventory: John Deere Gator
Search Our Inventory: Tillage
Search Our Inventory: Zero-Turn Mower
25A
- Adjustable cutting height
- Uses a heavy-duty gearbox with a rating of 65 hp
- Compatible with any Category 1 3-point hitch
Features
Adjustable cutting height
Roller
The roller can be set at four different cutting heights, from 1.3 cm to 12.7 cm (1/2 in. to 5 in.) The tractor's 3-point hitch upper link is used to regulate the cutting height between these positions.
Power take-off (PTO) drive shaft and gearbox
Heavy-duty gearbox
PTO drive shaft
All mowers use a heavy-duty gearbox with a continuous rating of 65 hp.
The power is transmitted through fully shielded, telescoping drive shafts with quick-attach and detach characteristics for easy hookup.
36 flail-knife rotor provides uniform distribution of pulverized material
Rotor and knives
A three-bank, counterbalanced rotor is equipped with 36 individually replaceable knives:
-
Rotor revolves at 1850 rpm to produce a 152.9-km/h (95-mph) blade-tip speed for a clean cut.
- Knives are arranged on the rotor to provide uniform distribution of material across the full cutting width.
- Knives pivot at their mounting points to minimize damage if an obstruction is hit.
Tractor hookup
Tractor hookup
The 25A hitch is now compatible with any Category 1 3-point hitch (with or without the iMatch™ Quick-Coupler system).
iMatch compatibility starts with serial number 644700.
Key Specs
| Cutting width | |
|---|---|
| Cutting height | |
| Blades - Number | |
| Blades - Type | |
| Rotor - Diameter | |
| PTO | |
| Tractor horsepower required - Minimum | |
| Tractor horsepower required - Maximum | |
| Quick-coupler compatible | |
| Weight - Approximate |
Machine
| Cutting width | Centered Centered 1.98 m 78 in. |
|---|---|
| Cutting height | 13 to 127 mm 0.5 to 5 in. |
| Hood thickness | 3.2 mm 0.125 in. |
Blades
| Number | 72 (36 pairs) |
|---|---|
| Type | Smooth-cut, cupped-type |
| Tip speed |
Rotor
| Speed | 1,850 rpm |
|---|---|
| Diameter | 114 mm 4.5 in. |
Drives
| PTO | 540 rpm |
|---|---|
| Gear case (cont. rating) | |
| Belts | Single HC section |
| Gauge roller | 140 mm 5.5 in. |
Tractor HP Required
| Minimum | 22 kW 30 hp |
|---|---|
| Maximum | 56 kW 75 hp |
3-Point Hitch
| Quick-coupler compatible | Yes (Category 1 and 2) |
|---|
Dimensions
| Overall width | 2.53 m 99 in. |
|---|---|
| Overall height | 0.99 m 39 in. |
| Overall length | 1 m 40 in. |
Weight
| Approximate | 278 kg 612 lb |
|---|
Additional information
| Date collected |
|---|