The Ranch Zone
King Ranch Ag & Turf
The Ranch Zone
Search Our Inventory: Row Crop Tractor
Search Our Inventory: John Deere 5075E
Search Our Inventory: Skid Steers
Search Our Inventory: John Deere 8370R
Search Our Inventory: Frontier Rotary Cutter
Search Our Inventory: Cotton Picker
Search Our Inventory: Lawn Mower
Search Our Inventory: John Deere Gator
Search Our Inventory: Tillage
Search Our Inventory: Zero-Turn Mower

John Deere 9800 Self-Propelled Forage Harvester

Model Photo

9800

  • 856 hp, 24L Liebherr V12 engine
  • Driveline designed to deliver optimal crop flow when the engine is operating in its efficiency sweet spot
  • The ProStream crop flow designed with extra heavy-duty components for high horsepower and more throughput than ever before

 

Features

High-capacity feeding supports high silage quality

Leading header technology

John Deere rotary harvesting units are built for reliable and powerful feeding of high-capacity forage harvesters. Two fundamental designs are available to match all producer needs. The 600plus Series Headers are the universal solution for different crops up to 4-m (13.1-ft) tall. The 700plus Series Headers are the perfect solution for high-yielding crops.

772 Rotary Harvesting Unit 772 Rotary Harvesting Unit

Available beginning in model year 2019, the top-model 772 12-Row Large-Drum Rotary Harvesting Unit has been designed to fully leverage the capacity of 9000 Series Self-Propelled Forage Harvesters (SPFH).

6X9 Series Windrow Pickup 6X9 Series Windrow Pickup

The 6X9 Series Pickups with the patented endless flight vortex auger design and optional dual header drive enable high-capacity feeding of John Deere SPFH. Key advantages are the throughput boost in high-yielding crops but also the easy handling of uneven windrows.

Variable header drive
Power distribution gearbox (A), header pump (B), and header motor (C) Power distribution gearbox (A), header pump (B), and header motor (C)

John Deere SPFH come with variable header drive in base. The header speed is automatically synchronized with the feeding speed and length of chop through a hydrostatic IVT™ drive system. This ensures a gentle and even crop transfer from the header into the machine without blocking or disrupting material transition. Producers receive the benefit of high chopping quality and full leverage of the header and crop flow potential.

Dual header drive

Dual header drive for the SPFH and the 6X9 Series Pickups complements the benefits of the variable header drive. While the variable header drive automatically synchronizes the pickup auger and harvester feeding speed, the dual header drive with its individual hydraulic drive of the pickup tines is speed matched with vehicle speed to ensure clean crop picking in changing conditions and windows.

Speed synchronization between the SPFH and header Speed synchronization between the SPFH and header

Tines speed up and slow down with forward speed while the pickup auger speed is still synchronized with the length of chop and feedroll speed. Producers benefit from a better quality of chop, smoother feeding, and an easy-to-utilize harvesting system.

Hydraulic feedroll dampening

The 9000 Series SPFH offer the hydraulic feedroll dampener in base. Next to the four individual springs applying high pressure on the crop mat entering the machine, the dampener supports crop compaction in uneven crop conditions and ensures smooth feeding even at the highest feeding speeds when chopping for a very long period.

Hydraulic feedroll dampening Hydraulic feedroll dampening
Crop compaction and even feeding at the feedroll Crop compaction and even feeding at the feedroll
Unique foreign object protection

A state-of-the-art metal detector scans for metal in the crop mat and stops the intake in case of tripping. Optionally, this safety device can be completed with a unique stone detection feature that senses for knocks and abnormal feedroll movement. Two redundant sensors developed for this application improve solid foreign object detection and minimize false tripping caused by lumps or uneven windrows.

Low engine speed concept

The John Deere 9000 Series Self-Propelled Forage Harvesters (SPFH) have been developed with a clear focus on machine performance: more throughput and less fuel consumption while providing maximum uptime and low cost of operation.

 

A key success factor is the concept of lower engine rpm at higher harvesting component speeds.

V12 – 24-L concept: The Liebherr® D9512 engine

The top-model 9700, 9800, and 9900 SPFH are equipped with a Liebherr 12-cylinder V-engine with 24-L displacement. The Liebherr D9512 is a state-of-the-art engine and delivers what a high-performance forage harvester requires:

  • High power density and great fuel efficiency
  • Constant maximum power down to lower engine rpm
  • Torque curve designed for forage harvesting applications
Torque and power of the Liebherr engine Torque and power of the Liebherr engine

The broad maximum power range of the Liebherr V12 engine cuts off the less-efficient rpm area above 1800 rpm. The rising torque curve down to 1300 rpm enables efficient operation of the machine in the lower rpm range.

Revised driveline with optimized component speeds

To reach maximum efficiency and performance, all machine component speeds are re-worked and laid out for best function in the 1400 to 1800 engine rpm range. This also leads to better fuel efficiency with an optimum range from 1250 to 1600 rpm, where the engine has its lowest specific fuel consumption (g/kWh).

Specific fuel usage in rpm range Specific fuel usage in rpm range

This unique concept delivers undisputed customer value:

  1. 10 percent more throughput (t/kW)*
  2. 10 percent better fuel economy (L/t)*
  3. More hours in the field with 1500-L (396.25-gal.) diesel tank and 90-L (23.8-gal.) urea tank

*Compared to replaced models

 

Liebherr is a trademark of Liebherr-International AG.

Improve silage quality with two kernel processing options

Overview

John Deere self-propelled forage harvesters (SPFH) set new standards in kernel processing performance. Proven in independent tests during corn harvest in 2016 and 2017, John Deere kernel processors (KP) deliver smashed kernels and highly processed plants that growers expect. With two different models, the John Deere Premium KP™ kernel processor and the John Deere XStream KP™ kernel processor, all different needs will be satisfied.

 

Additional details

All John Deere SPFH can be operated with or without a kernel processing unit in position. When not in use, a crop transition chute (or grass chute) swings into position with a few turns of a crank. The crop transition chute comes standard on all harvesters.

 

The SPFH feature the AutoLube central greasing harness; the respective central greasing equipment is available on the Premium KP kernel processor. The XStream KP kernel processor features automatic pressurized oil lubrication.

 

The John Deere Premium KP is available for the 9500 to 9800 models, and the John Deere XStream KP is available for all 9000 Series models. The 9900 model can only be equipped with an XStream KP.

John Deere Premium KP
John Deere Premium KP kernel processor John Deere Premium KP kernel processor

On the 9000 Series, the proven John Deere Premium KP can be installed on the 9500 through 9800 models. With their highly intense processing, they deliver excellent forage quality at any length of cut.

 

The main features of the Premium KP are:

  • 240-mm (9.45-in.) roll diameter for different crops (maize and whole crop)
  • 32 percent speed differential; option of 40 percent speed differential
  • Standard KP housing with grease lubrication in base
  • Electric KP gap adjustment from the cab as option

 

The following rolls are available for the Premium KP:

  • Standard sawtooth (118/118 teeth)
  • Dura Line™ sawtooth (118/118 teeth)
  • Whole crop sawtooth (178/178 teeth)

 

With the option of Dura Line rolls, a longer lifetime and less wear can be reached, resulting in lower cost of operation.

 

For easy and uncomplicated mounting and dismounting of the KP, a crane with electric winch can be installed as an option.

Mounting and dismounting the KP with the optional crane and winch Mounting and dismounting the KP with the optional crane and winch

The following diagram shows the complete John Deere Premium KP offering with all possible combinations.

 

 

Sawtooth (118/118 teeth) – code 3734

John Deere Premium KP with:

  • Standard KP housing
  • 240-mm (9.45-in.) roll diameter
  • 32 percent speed differential
  • Grease lubrication

Dura Line sawtooth (118/118 teeth) – code 3738

 

Whole crop sawtooth (178/178 teeth) – code 3743

 

The following additional options are also available for the Premium KP.

Crane for KP removal complete with electrical winch (code 8380) Crane for KP removal complete with electrical winch (code 8380)
Hydraulic KP belt tensioner (code 8381) Hydraulic KP belt tensioner (code 8381)
Electrical KP gap adjustment (code 8376) Electrical KP gap adjustment (code 8376)
40 percent speed differential (code 9389) 40 percent speed differential (code 9389)
Complete whole crop KP as bundle (code 9379) Complete whole crop KP as bundle (code 9379)
Temperature monitoring (code 838A) Temperature monitoring (code 838A)
Crane for KP removal complete with electrical winch (code 8380) Crane for KP removal complete with electrical winch (code 8380)
John Deere XStream KP
John Deere XStream KP kernel processor John Deere XStream KP kernel processor

The John Deere XStream KP is the heavy-duty solution made for high throughput and high-horsepower machines and stands for extreme processing at any length of cut in any crop and any conditions.

 

The XStream KP rolls are manufactured and delivered by Scherer Inc., located in South Dakota, United States. The kernel processor is supplied ex-factory by Scherer Inc. and fits on all 9000 Series models. As Scherer Inc. has a strong focus on dairy forage production and is the leading company in KP roll designs and manufacturing since 1999, a strong statement is set regarding kernel processing and forage quality.

 

More information about Scherer Inc. can be found on their website: http://www.schererinc.com/

Scherer Inc. logo Scherer Inc. logo

The main features of the XStream KP are:

  • 250-mm (9.8-in.) roll diameter
  • 50 percent speed differential
  • Heavy-duty housing with KP roll quick-exchange system
  • Pressurized oil lubrication of bearings
  • Bearing temperature monitoring system (option)

The following rolls are available for the XStream KP:

  • Dura Line sawtooth (110/145 teeth)
  • Dura Line XCut (110/145 teeth)
  • Dura Line Whole Crop XCut (145/165 teeth) – only available for 9000 Series

All XStream KP options for 9000 series are available with 10- or 11-inch rolls.

 

In comparison to the Dura Line sawtooth rolls, the Dura Line XCut rolls have a spiral groove sawtooth profile that delivers excellent processing, especially at long lengths of cut. The spiral groove design delivers highly processed plants and smashed kernels.

 

For easy and uncomplicated mounting and dismounting of the KP, a crane with electric winch can be installed as an option.

Mounting and dismounting the KP with the optional crane and winch Mounting and dismounting the KP with the optional crane and winch

The following diagram shows the complete John Deere XStream KP offering with all possible combinations

 

 

Dura Line sawtooth (110/145 teeth) – code 3750


John Deere XStream KP with:

  • Heady-duty housing
  • 250-mm (9.8-in.) roll diameter
  • 50 percent speed differential
  • KP roll quick-exchange system
  • Pressurized oil lubrication

Requires:

  • Air compressor (code 8710)
  • Hydraulic KP belt tensioner (code 8381)
 

Dura Line XCut sawtooth with spiral groove (110/145 teeth) – code 3751

Dura Line XCut sawtooth with spiral groove for whole crop (145/165 teeth) – code 3752
NOTE: Only available for 9000 Series models.

 

The following additional options are also available for the XStream KP.

Dura Line™ wear parts

Overview

Due to increased machine usage (chopping more tons per hour), standard high-quality steel parts need to be replaced more frequently. Since 2010, John Deere has been meeting the challenge and exceeding expectations with Dura Line wear parts.

 

Dura Line components  were developed by John Deere and are installed in high wear spots on the self-propelled forage harvesters (SPFH), mainly in the crop flow. The technology is normally used for heavy-duty environments such as mining and machine tooling. It is the highest material quality in the industry that is installed on an SPFH.

Benefits
  • The coating is extremely wear resistant with an extraordinarily smooth surface due to the special heat treatment and a proprietary tungsten carbide composition.
  • Dura Line™ provides a permanent fast-chopping process with low crop friction on the components while fuel consumption remains low.
  • Tests show that when chopping in the same crop conditions and chopping the same tonnage, Dura Line parts last four times as long as, or longer than, standard parts. Time and money associated with replacing parts are significantly reduced.
Dura Line coating Dura Line coating
Dura Line processing Dura Line processing
Additional details

Dura Line guarantee

The Dura Line guarantee provides a specified number of engine hours or time of usage (whichever comes first) for the different Dura Line liners. The Dura Line guarantee was first introduced in 2017 and is valid for all 8000 and 9000 Series SPFH models. Dura Line liners damaged from foreign material or misuse are excluded. Only parts that are completely worn are replaced.

 

For more information about the Dura Line guarantee, contact the local sales organization.

 

Dura Line packages

The John Deere Dura Line crop flow liners come in three packages. Depending on the individual harvesting requirements, there is a perfect package for every need.

  • Basic: Perfect solution for machines mainly harvesting corn
  • Premium: Ideal for abrasive conditions (particularly grass)
  • Ultimate: Perfect choice for toughest conditions, providing full crop flow coverage
Dura Line wear parts Dura Line wear parts
# Dura Line component Basic Premium Ultimate
1 Spiral band
2 Accelerator band
3 Spout flap
4 Spout wear liners  
5 Front chute base liner  
6 Grass chute base liner    
7 Accelerator side wall liners    
8 Front chute side liners    
9 Transition front liners    
10 Dura Line™ smooth roll scraper
11 Dura Line™ knife holder    
12 Dura Line™ Plus shear bar  

High forage quality with HarvestLab™ 3000 and AutoLoc™ system

HarvestLab 3000 measures dry matter and constituents on the go HarvestLab 3000 measures dry matter and constituents on the go
HarvestLab 3000 sensor mounted on the spout HarvestLab 3000 sensor mounted on the spout

The HarvestLab 3000 sensor mounts to the top of the discharge spout and takes accurate dry matter and ingredient readings (more than 4000 measurements per second) of the crop through the sapphire glass lens as crop passes through the spout. This is the same technology forage labs use to measure dry matter. HarvestLab 3000 with John Deere Constituent Sensing measures dry matter and constituents like sugar, starch, acid detergent fiber (ADF), neutral detergent fiber (NDF), crude fiber, crude ash, crude protein, crude fat, Metabolic Energy and ELOS depending on the crop. In addition, the HarvestLab 3000 sensor can also be used as a stationary unit.

Stationary usage of HarvestLab 3000 Stationary usage of HarvestLab 3000

Crop type and constituent sensing

 

Crop type Moisture/ dry matter Crude protein Crude starch uNDF ADF Crude sugar Crude Ash
Corn  --- 
Alfalfa  X ---  X X X X
Whole crop silage X X X X X
Grass X ---  ---  ---  ---  ---  --- 

 

When HarvestLab 3000 is used in conjunction with Harvest Monitor™ system, a wealth of important information becomes available to the operator, including productivity in acres per hour, throughput in tons per hour, total area harvested, total crop mass harvested, yields, and dry matter. To measure and document the constituents, a G5Plus Universal Display is required. All data documented on the G5Plus Universal Display is shown in John Deere Operations Center.

Constituent data in Operations Center Constituent data in Operations Center

When the HarvestLab 3000 is used in conjunction with an 8000 or 9000 Series Self-Propelled Forage Harvester (SPFH) and a GreenStar™ display, AutoLoc functionality is automatically present. AutoLoc automatically varies the length of cut according to the desired crop-dry matter correlation settings based on the dry matter readings from the HarvestLab 3000 sensor. With the AutoLoc adjustment, bunk density is improved and a high forage quality is reached.

AutoLoc - Automatic length of cut
AutoLoc on the SPFH AutoLoc on the SPFH
  1. HarvestLab 3000 — moisture and ingredients on the go
  2. Manual control (operator)
  3. AutoLoc — automatic control
  4. IVLOC™ transmission — length of control changes on the go

 

AutoLoc, a feature exclusive to John Deere and unique to the market, brings added value to the HarvestLab sensor and John Deere SPFH. AutoLoc works in conjunction with the HarvestLab 3000 sensor and IVLOC transmission to automatically adjust the length of cut (LOC) based on crop moisture levels to improve bunk density and reduce long particles in dry corn. Nutritionists, herdsmen, and SPFH operators will all benefit from this innovation.


John Deere is leading the industry in providing real-time information that matters most to forage production. Quality forage comes from properly packed silage, which is directly related to the moisture content and LOC of the crop.

LOC changes are made automatically in the field based on moisture readings and predetermined settings determined by operator requirements. No in-field calibration is required to load the LOC requirements; the operator simply uses the GreenStar™ display to program the desired LOC settings at different moisture levels.

When moisture levels of crop in the field change, the IVLOC drive automatically responds to either increase or decrease the feedroll speed, which in turn changes the LOC. If moisture levels of the crop are outside of the desired range, the IVLOC transmission adjusts and limits the LOC based on the maximum and minimum LOC settings as determined by the operator.

AutoLoc screen AutoLoc screen

AutoLoc solves the dry matter and LOC puzzle

According to the accurate moisture readings, AutoLoc is able to adjust the proper LOC automatically in steps as small as 1 mm (0.04 in.). This process is faster and more accurate than any operator could do manually because of all the other important operating functions being performed. This can increase overall efficiency dramatically.

With AutoLoc, the SPFH operator simply sets the minimum, optimum, and maximum moisture levels and the corresponding lengths of cut. AutoLoc then creates a linear curve between the minimum and the optimum and between the optimum and the maximum. LOCs are then determined based on those lines.

For example, if the optimum LOC were set to 15 mm (0.59 in.) at 68 percent moisture and 8 mm (0.31 in.) at 50 percent moisture, and the actual moisture of the crop was 63 percent, AutoLoc would change the LOC to be 13 mm (0.51 in.) based on the linear curve it created.

AutoLoc chart AutoLoc chart

Forage harvester performance and AutoLoc

The following equipment is required for AutoLoc functionality:

  • GreenStar display with Gen 4 4640 Universal Display
  • HarvestLab 3000 sensor
  • 8000 or 9000 Series SPFH

Why AutoLoc is a must to ensure silage quality and overall profitability


It impacts the silage compaction in the bunker to ensure the quality of feed being stored is the best quality possible.

Silage density and AutoLoc

Good silage starts with high bunk density to preserve the crop value. This is the main objective for both dairy/beef producers and biogas plants. Many factors are involved in achieving high bunk density, including type of crop, moisture levels, length of cut, bunk filling speed, and compaction machinery.

Some of these factors cannot be easily changed while harvesting. AutoLoc adds an improved sense of control to the harvesting and silage storage operation. Operators do not need to compromise when choosing the proper length of cut based on moisture. AutoLoc takes care of this chore automatically.

Oftentimes, producers are so focused on getting the job done that important tasks and details are overlooked during the harvesting operation. Knowing the growing period for corn silage covers five months growing in the field and only a few days harvesting for 10 to 12 months of feeding, the process of the silage harvest and storage should be managed as well as possible.

The impact of the silage quality, which can be harvested and stored in just a few days, can have a huge impact on income throughout the entire year. The silage cost is a major part of the expenses in the dairy/beef and biogas plant businesses. Poor forage quality can cost tens of thousands of dollars per year in increased feed costs resulting in the producer having to invest in additional silage to reach the desired feed ration.

Spoilage/reheating and seeping losses are the biggest problems in silage bunks. These problems often happen due to insufficient compaction and an incorrect LOC. To achieve the right amount of silage compaction and keep as much air out of the silage as possible, the LOC has to be adjusted according to the moisture levels of the crop - the wetter the material, the bigger the particle size.

While varying lengths of cut can dramatically help to achieve high density levels, the length of cut of the material must be consistent in order to maintain normal rumination, chewing, and saliva production in the rumen. If the particles are too small, the food does not fit anymore with the process of the cow rumen and the compaction becomes difficult due to the instability of the material.

For this reason, John Deere created AutoLoc, which automatically adjusts the length of cut to the moisture value, while staying within the preset LOC range.

Having some limited LOC variations in a bunk silo should not affect the effective fiber in the ration on a daily basis. Using AutoLoc in conjunction with upright or bag silos can vary the effective fiber fed to animals on a daily basis.

Looking at the studies done by Honig and Rohr in 1985, as can be seen in the following table, it is possible to get high-density levels of dryer crop when the crop is chopped at a shorter LOC.

Length of cut

Bunk density

 73 percent moisture

64 percent moisture

4 mm (0.16 in.)

205 kg/m3 (12.8 lb/cu ft)

179.7 kg/m3 (11.2 lb/cu ft)

7 mm (0.28 in.)

192.2 kg/m3 (12.0 lb/cu ft)

174.6 kg/m3 (10.9 lb/cu ft)

14 mm (0.55 in.)

173 kg/m3 (10.8 lb/cu ft)

157 kg/m3 (9.8 lb/cu ft)

Key Specs

Maximum power At 1800 rpm (ECE R120): 640 kW
870 PS / 858 hp
Engine Type
Liebherr®
Exhaust emission regulation compliancy: Final Tier 4 / EU Stage V
Displacement
24.2 L
1476.8 cu in.
Model
D9512 A7 04
Cylinders
V 12
Fuel system Common rail plus four valves
Fuel tank capacity 1,500 L
396.3 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level) 103 L
23.8 U.S. gal.
Rated Power

Engine power

Maximum power At 1800 rpm (ECE R120): 640 kW
870 PS / 858 hp
Fuel tank capacity 1500 L
396.3 U.S. gal.
DEF tank capacity ( for FT4 or EU Stage V emission level) 103 L
23.8 U.S. gal.
Rated Power

Engine

Type Liebherr
Exhaust emission regulation compliancy: Final Tier 4 / EU Stage V
Model D9512 A7 04
Displacement 24.2 L
1476.8 cu in.
Cylinders V 12
Fuel system Common rail plus four valves
Air compressor Base
Engine/ground speed management
Manufacturer
Speed on road

Cooling system

Cooling fan drive Direct
Cooling system capacity

Driveline

Ground drive ProDrive™ system, autoshift transmission, differential lock (automatic and manual), automatic wet brake system
Engine rpm on road: 1200-1800 rpm
Hydraulics Load sensing
Main clutch Dry clutch
Number of discs Two discs
Main driveband Reinforced with Kevlar® inserts
Belt tensioning Active, hydraulic pressure
Main driveband, polybelt belts Nine grooves
Crop flow components
Crop harvesting unit

Electrical system/Electrical and hydraulic system

Type/voltage 12 / 24 V
Batteries/battery quantity/capacity 3 x 174 amp-hr
Alternator 12 V - 200 amp
24 V - 140 amp
Hydraulic system capacity 50 L
13.2 U.S. gal.

Ground drive

Differential lock Manual and automatic
Maximum transport speed ProDrive system: 20/25/30/40 km/h
12.4/15.5/18.6/24.9 mph
Rear axle type Hydromechanical 4WD
Automatic wet brake system Standard
Engine speed management Standard
Type

Cab

Tilt and extend steering column Standard
Air conditioning and heater Standard: ClimaTrak™ control
Cool box Optional
Trainee seat Standard
Hectare counter Standard
Operator information system Cornerpost display
CAN bus electronics Standard
Operator's seat Standard: Air-suspension seat
Panoramic view windows Standard
Side window wiper Rear and side window wiper optional
Parallel-type windscreen wiper
Electric adjust and heated Optional on rearview mirrors
Rearview mirrors Standard
Hand wash tank capacity

Machine management solutions

Yield monitoring Harvest Monitor™ optional
Documentation Harvest Doc™ optional
Crop analysis HarvestLab™ 3000 optional
Length-of-cut control based on crop parameter Standard: Infinitely variable length-of-cut (IVLOC™)
Optional: AutoLoc™ system - use with HarvestLab
Assisted steering systems Optional: AutoTrac™, Manual RowSense™, AutoTrac RowSense, Machine Sync

Harvest channel

Width Wide body channel
Crop flow components Low-friction crop flow concept

Header connection

Infinitely variable header drive Standard
Lateral pivoting frame Standard
Multicoupler Standard
Auto PTO coupler Optional
Header drive Base: Heavy-duty gearbox (i=3.75); pump/motor displacement: 85/80 cc
Optional: Extra heavy-duty gearbox (i=4.31); pump/motor displacement: 110/90 cc
Header height control Advanced header control (AHC) optional
Grass pickups (transport width) 3, 4, 4.5 m
9.8, 13.1, 14.8 ft
Maize headers 8, 10 or 12 rows
Working width: 6, 7.5, or 9 m
19.7, 24.6 , or 29.5 ft
Driveline
Header connection

Feeding system/Feedrolls

Feed roll frame opening Swing away, 37-45 degree (angle)
Number Four
Metal detector Standard
Stone detector Optional
Width, front 830 mm
32.7 in.
Standard feedroll drive Hydro feedroll drive IVLOC
Infinitely header drive speed
Optional feedroll drive

Cutterhead

Type Dura-Drum™ cutterhead
Knife drum width 850 mm
33.5 in.
Knife drum diameter 670 mm
26.4 in.
Speed at rated engine speed Standard - 1170 rpm
Optional - 1350 rpm
Knife types available (crop) Straight - grass
Curved - corn
Shear bar options Grass, corn, Dura Line™ corn, Dura Line Plus
Cutterhead housing width
Number of knives
Shear bar adjust
Shear bar, reversible

Knife sharpening system

Reverse rotation Yes
Automatic from cab Yes, remote from cab
Sharpening modes Grinding and finishing
Reverse drive
Reverse speed

Kernel processor

Type John Deere Premium KP™, John Deere XStream KP™
Quick-change Quick kernel processor - swing in/swing out
Quick KP removal Optional crane with remote-controlled electric hoist

John Deere Premium KP

Housing Standard KP housing
Lubrication Grease
Roll diameter 240 mm
9.45 in.
Maize - standard sawtooth or Dura Line™ roll teeth number (speed differential) 118 (32 or 40 percent)
Whole crop - standard sawtooth roll teeth number (speed differential) 178 (32 or 40 percent)
Weight 163.3 kg
360 lb
Available KP rolls
Sorghum, roll teeth number (speed differential)
Speed differential / Roll speed (lower)

John Deere XStream KP

Housing Heavy-duty KP housing
Lubrication Pressurized oil
Roll diameter 250 mm
9.8 in.
Maize - Dura Line sawtooth or XCut roll teeth number (speed differential) 110/145 (50 percent)
Whole crop - Dura Line XCut roll teeth number (speed differential) 145/165 (50 percent)
Available KP rolls
Bearing temperature monitoring system
Sorghum, roll teeth number (speed differential)
Speed differential / Roll speed (lower)
Weight

Blower/Crop accelerator

Rotor diameter/housing width 560 / 620 mm
22.86 / 24.41 in.
Number of blades 10
Speed (option) 1890 rpm

Spout

Rotation, degrees 210 degree (angle)
Hydraulic height position Standard: Hydraulic raise and lower
Optional: Automatic spout positioning
Double-cap deflection Standard
Reach from center line (Optional) 6 or 8 row: 4.73 m
15.5 ft
10 row: 5.87 m
19.3 ft
12 row: 6.71 m
22 ft
Working height (maximum) Height to spout: 6.6 m
21.65 ft
Number of wear liners

Maintenance

Rotary radiator screen cleaner Standard
Automatic lubrication system Standard: AutoLube
Engine oil and filter change duration 1000 hours

Vehicle

Transport length (without header) 6.6 m
21.7 ft
Transport width (without header) 3.2-3.8 m
10.5-12.5 ft
Transport height (to cab roof) Below 4 m
13.12 ft
Approximate weight (without header)
With front tires
With rear tires
Working height (maximum)

Additional information

Date collected

Disk type (kernel processor)

Diameter of disks
Number of disks (top/bottom)
Weight

Length of cut

Range

Propelling drive

Standard

Serrated roller (kernel processor)

Maize, roll teeth number (speed differential)
Sorghum, roll teeth number (speed differential)
Weight
Wholecrop, roll teeth number (speed differential)

Transmission

Type