The Ranch Zone
King Ranch Ag & Turf
The Ranch Zone
Search Our Inventory: Row Crop Tractor
Search Our Inventory: John Deere 5075E
Search Our Inventory: Skid Steers
Search Our Inventory: John Deere 8370R
Search Our Inventory: Frontier Rotary Cutter
Search Our Inventory: Cotton Picker
Search Our Inventory: Lawn Mower
Search Our Inventory: John Deere Gator
Search Our Inventory: Tillage
Search Our Inventory: Zero-Turn Mower

John Deere 561M Round Baler

Model Photo

561M

  • Bale Documentation with John Deere Operations Center™
  • John Deere moisture sensors and weighing system
  • Baler display with customizable user interface
  • MegaWide™ pickup

 

Features

1 Series Round Balers - Model specification levels

Round baler models
Model Bale size Available pickups
451E 1.2 x 1.5 m
(4 x 5 ft)
Regular
451M 1.2 x 1.5 m
(4 x 5 ft)
MegaWide™ Plus hydraulic pickup optional
451R 1.2 x 1.5 m
(4 x 5 ft)
High-Capacity, High Capacity with Precutter
461M 1.2 x 1.8 m
(4 x 6 ft)
MegaWide Plus hydraulic pickup in base
461R 1.2 x 1.8 m
(4 x 6 ft)
High-Capacity, High Capacity with Precutter
551M 1.5 x 1.5 m
(5 x 5 ft)
MegaWide Plus hydraulic pickup optional
561M 1.5 x 1.8 m
(5 x 6 ft)
MegaWide Plus hydraulic pickup in base
561R 1.5 x 1.8 m
(5 x 6 ft)
High-Capacity, High Capacity with Precutter
Round baler model specification
Baler option Applicable models
E = Economy
  • Dry hay only
451E
M = Standard
  • Dry hay
  • Silage
451M, 461M,
551M*, and 561M
R = Premium
  • Dry hay silage
  • Precutter
451R, 461R, and 561R

 

MegaWide™ pickup with MegaTough™ pickup teeth offers super capacity

451M MegaWide pickup 451M MegaWide pickup

A MegaWide pickup is base equipment on 451M, 461M, 551M, and 561M Round Balers.

 

Hydraulic pickup is in base configuration on 451R, 461M, 461R, 561M, 561R.

 

Hydraulic pickup is an option on 451E (dealer installed), 451M (factory installed), 551M (factory installed)

MegaWide pickups make baling easier, especially in wide or windblown windrows, and increases productivity; more hay volume means more bales per hour.

  • Flare-to-flare width of 1.8 m (5.9 ft) on balers with a 1.2 m (4-ft) wide bale chamber
  • MegaWide pickup makes it easier to produce better-shaped bales and improves crop pickup in wide, windblown, or scattered windrows
  • Mega teeth, located at the ends of the pickup, pull crop around the flares when baling wide or windblown windrows
  • MegaTough pickup teeth provide greater strength and durability
  • Exclusive square design handles high-impact loads without yielding
  • Sturdy toothbar design
  • Self-adjusting roller baffle
  • Spiral rotor-feed system improves feeding in all crop conditions
  • Chain driven for positive feeding
  • Cut-out clutch protected
  • Semi-pneumatic gauge wheels
MegaTough pickup teeth MegaTough pickup teeth

Mega and MegaTough pickup teeth are base equipment:

  • Mega teeth, at the ends of the pickup, are heavy-duty for long life and improved crop retrieval
  • MegaTough pickup teeth are designed to withstand the harshest baling conditions and provide long service life
Toothbars on 1.5-m (5-ft) baler Toothbars on 1.5-m (5-ft) baler

The 1.2-m (4-ft) balers use a full-length, reinforced toothbar design.

The 1.5-m (5-ft) balers use a heavy, C-channel construction. The pickup toothbars are divided into two half-sections that mount to a center spider for increased strength and even crop feeding.

Roller baffle Roller baffle

Available only on the MegaWide Plus pickup, the patented roller baffle is self-adjusting and produces smoother crop flow across the pickup. The roller also improves crop pickup in small windrows and prevents roll ahead of crop.

When combined with the MegaWide Plus pickup, this feeding system allows increased ground speed with less chance of plugging for increased productivity in all field conditions.

  • Self-adjusting
  • Smooths crop for even flow across pickup
  • Allows for faster ground speed with less chance of plugging
  • Increases operator productivity
Spiral rotor Spiral rotor
Auger and rotor feed system Auger and rotor feed system

The MegaWide Plus pickup uses a rotor-feeding assembly, which mounts behind the pickup for smooth and even crop flow into the bale chamber.

  • Augers and rotor teeth are driven on the same shaft, eliminating the need for additional drives.
  • The rotor is fixed to the baler frame, allowing positive and even feeding into the bale chamber.
  • Large-diameter converging augers have high crop-flow capacity, and auger scrolls help to force crop into the chamber.
  • Spiral design enhances feeding in uneven windrows and reduces loading on the rotor.
Rotor stripper Rotor stripper

Rotor strippers allow crop to be lifted from the rotor teeth into the chamber without cutting or wrapping the crop.

Cut-out clutch protection and feeder-drive chain Cut-out clutch protection and feeder-drive chain

The MegaWide Plus pickups and spiral rotor are chain-driven for positive bale starts with cutout clutch protection. The pickup is being driven off the drive roll and bypasses the starter roll. This will allow for reduced wear and breakage of the starter roll chain.

Semi-pneumatic gauge wheel Semi-pneumatic gauge wheel

Semi-pneumatic gauge wheels provide smooth ground gauging over uneven terrain and protection to the pickup.

  • Stiffer rubber sidewalls
  • No air pressure to maintain, which mean no flat tires
  • Adjustable to meet pickup tooth-to-stubble height requirements

The pickup float springs are positioned for excellent flotation.

  • Adjustable to meet varying field conditions
  • Float springs only support the pickup reel
    • Rotor assembly is fixed to the baler frame, eliminating additional weight on the pickup system
Adjustable crank handle Adjustable crank handle

The adjusting crank positions the pickup to the desired operating height to match crop or field conditions.

An optional hydraulic pickup lift cylinder is available as an attachment.

  • Makes raising for transport or clearing obstructions easy
  • Crank handle serves as a down stop
  • Adapts to regular, MegaTooth and MegaWide Plus pickups
  • Hydraulic pickup lift comes standard on premium machines

 

Heavy Duty Package

The heavy duty package is standard equipment on R series balers and option on M series balers. The components and features of the heavy duty package are below.

  • Two year or 12,000 bale Warranty
  • Cam-Cut Out Clutch
  • Heavy-Duty Chain
  • Pickup - Heavier Spider Gear, Cam Arm Bearings, Cam Shafts, and Bearings in Spider
  • Larger Diameter Shaft and Bearings on #11 and #9 rolls
  • Grease Bank

Silage configuration

Staggered roller-auger kit Staggered roller-auger kit
#

A silage-configuration baler allows the producer to put up silage hay. A silage configuration machine does not offer a precutter. There are three major components to a silage configuration baler: a staggered roller-auger kit (1), a starter roll-scraper knife, and a screen (2). The powered auger sits above the staggered roll on the baler to help keep wet hay from traveling up the belts and reduce buildup on the roll. The screen is bolted on the front of the baler as a safety feature. The knife/scraper is mounted in front of the starter roll to help prevent wrapping of wet crop on the starter roll.

The silage kit is offered as a bundle for field installation if the baler is not ordered as a silage-configuration machine from the factory. Attachment BE32442 is for 1.22-m (4-ft) wide machines and BE32443 is for1.52-m (5-ft) wide machines.

Also offered is a high-moisture kit. This kit does not include the same components that are on the silage-configuration balers. It offers the starter roll-scraper knife but does not include the staggered roll-auger kit. Attachment BE23828 is for 1.22-m (4-ft) machines and BE23829 is for 1.52-m (5-ft) machines.

Starter roll knife and screen Starter roll knife and screen
#

Base equipment on: 451M Silage, 551M Silage, 461M Silage, 561M Silage, 451R Precutter, 461M, 461R Precutter, 561M and 561R Precutter

Auxiliary take-up rolls Auxiliary take-up rolls
#

Auxiliary take-up rolls prevent belt crossover and flipping in wet conditions. This roll is base equipment on all silage and precutter configuration balers.

Bale scale and moisture sensor

Bale scale and moisture sensor Bale scale and moisture sensor
Bale scale and moisture sensor Bale scale and moisture sensor
Bale scale and moisture sensor Bale scale and moisture sensor

Integrated-sensor measurements for weight and moisture provide bale characteristics (moisture/weight). This technology enables producers to document bale moisture and weight and take data into Operations Center for post-harvest analysis. This allows better management decisions around water and nutrients, plus document that information to get higher prices for their bales, as well as possibly reduce their input costs.

Net lift assist and net lighting

Net lift assist Net lift assist
Net lift assist Net lift assist
Net lighting Net lighting

Connecting linkage is attached to the net-wrap handles and the net-wrap is moved with the lift mechanism via remote tether. Net-hood lighting illuminate’s net-wrap components.

Preservative system

Integrated preservative system Integrated preservative system
Integrated preservative system Integrated preservative system

Integrated Preservative System allows producers to bale sooner and with less worry about bales molding. Comparable hardware to John Deere’s Exact Apply system Tank, pump, sensors, controller (hardware/software), and a distribution system.

G5e external speaker

G5e External Speaker Device G5e External Speaker Device
G5e External Speaker Device G5e External Speaker Device

The G5e External Speaker is an optional attachment for G5e displays only.

  • Provides increased volume levels for all G5e display notifications
  • Assist baling operations in situations with high in-cab noise or for operators with hearing impairments
  • Installed externally on harness for easy access
  • Omits sound separate from G5e display speaker to increase volume up to 16 percent
  • Manually adjust volume by turning front dial left or right

The external speaker device provides increased volume levels for all G5e display notifications. It will omit a sound separate from the G5e display to assist baling operations in situations with high in-cab noise or for operators with hearing impairments. It is installed externally on the harness and can have volume levels changed by manually turning the front dial left or right. Adding the external speaker increases G5e notification volume by 16 percent. The external speaker is optional and is available as an attachment.

Adjustable hitch to match wide array of tractor drawbar heights

Side view of adjustable hitch Side view of adjustable hitch
Front view of adjustable hitch Front view of adjustable hitch

The 1 Series Round Balers came standard with an adjustable hitch and this feature will continue to be in base with the 1 Series Round Balers. This feature allows the hitch height to be adjusted to optimize crop-feeding performance. Due to the wide array of tractor tire sizes and drawbar heights, hitch adjustment may be necessary to get the proper feed opening of the baler. The adjustable hitch eliminates the need for the 51-mm (2-in.) thick tractor drawbar kit (AE57344) because it has a wider opening.

Benefits of the adjustable hitch:

  • Ability to match baler to numerous tire sizes
  • Allows for drawbar height to fall within 330 mm to 559 mm (13 in. to 22 in.) from the top of the drawbar to the ground
  • Eliminates narrow feed opening on the baler which can cause plugging
  • Allows pickup head to follow terrain without missing crop

All eight bolts must be used when adjusting the hitch. There are four different positions as shown below:

Position 1 (top) (factory setting) - regular pickups Position 1 (top) (factory setting) - regular pickups
Position 2 Position 2
Position 3 (factory setting) - MegaWide Position 3 (factory setting) - MegaWide
Position 4 (bottom) Position 4 (bottom)

Also standard on all 1 Series Round Balers, except the 451E, is the drawbar shield. This helps to eliminate hay from getting caught on the hitch of the baler. The drawbar shield is designed to allow the operator to remove or attach the flap without having to unhook the baler from the tractor.

Drawbar shield Drawbar shield
Drawbar shield installed on baler Drawbar shield installed on baler

Vertical forming chamber maintains uniform bale density

Bale-starting diagram Bale-starting diagram

As the hay enters the forming chamber from the pickup, belts immediately turn the hay to form a tight, dense core.

Incoming hay then feeds between the bale and the lower gate roll. Hay is tightly compressed into smooth, dense layers as it enters the bale.

Chaffing is greatly reduced to prevent loss and retain hay quality in the bale.

Full-sized bale in bale chamber Full-sized bale in bale chamber

The idler arm rises with bale growth, forcing oil from the hydraulic cylinder through a pressure-relief valve to maintain uniform bale density throughout the bale-forming process.

Exclusive DiamondTough™ belts with plate-type splices

Staggered belts Staggered belts

John Deere's 178-mm (7-in.) wide diamond-tread design ensures fast bale starts and grips the bale to prevent slippage and reduce chaffing. The treads are self-cleaning to reduce carryover. The belts are staggered to reduce the loss of fine material and are closely spaced to contain the hay for fast, easy starts.

The belts enclose 91 percent of the bale width to reduce loss of fine material and retain hay quality.

The staggered belt roll design enables any loose hay under or behind the belts to be returned to the pickup and into the baler. This design helps to prevent buildup at the front of the baler, which could cause hay loss and belt or splice damage.

DiamondTough triple-weave belts DiamondTough triple-weave belts
#

Every baler in the 1 Series Family uses DiamondTough belts. Belts are constructed using a patented triple-weave process of nylon and polyester materials.

They have the strength to handle heavy shock loads and help maintain consistent belt length.

The DiamondTough belts are more puncture and tear resistant than other belts on the market and provide improved belt life and reliability.

Plate-type fasteners
Plate-type splices Plate-type splices
#

All of the 1 Series Balers use the plate-type fasteners.

This closed-loop design uses a plate fastener with pre-assembled rivets that lock the fasteners into the belt, providing a powerful vice-type grip on the belt.

  • The plates and rivets are manufactured from high-tensile stainless steel.
  • Strong belt splices mean less maintenance and more productivity.
  • The loop area is cold forged, making it extremely wear resistant in the coupling area, resulting in a very long cycle life.
  • The spring steel pin is notched and locks into the splice connection without having to bend the pin or use external retainers.

Key Specs

Belts-other - width 17.8 cm
7 in.
Density control Hydraulic
Bale size indication Electronic display on monitor
Regular pickup - Bars Four
Regular pickup - Number of teeth 96
Regular pickup - Tooth spacing 6 cm
2.6 in.
MegaWide Plus pickup - Number of regular teeth 120
MegaWide Plus pickup - Number of mega teeth Eight
High-capacity pickup - Number of middle teeth 120
High-capacity pickup - Number of mega teeth Eight

Bale

Size Diameter
81 - 183 cm
32 - 72 in.
Width
157 cm
62 in.
1.5 x 1.8 m
5 x 6 ft
Weight Full-size bale in dry crop
998 kg
2,200 lb
Max. allowable for silage bale
1,089 kg
2,500 lb
Shipping dry - 3,257 kg
7,182 lb
Shipping silage - 3,389 kg
7,472 lb

Baler

Base weight
Weight Shipping dry - 3,257 kg
7,182 lb
Shipping silage - 3,389 kg
7,472 lb
Shipping precutter - 4,239 kg
9,346 lb
Length Gate closed
371 cm
146 in.
Gate open
475 cm
187 in.
Height Gate closed
279 cm
110 in.
Gate open
368 cm
145 in.
Width With standard tires
226 cm
89 in.
With opt. tires (Hi-Flotation)
285 cm
112 in.

Bale forming

Forming chamber
Belts-other Number
Eight
Width
17.8 cm
7 in.
Texture
Diamond Tread friction surface belts
DiamondTough, triple-weave, single-ply belts
Enclosed percent of bale surface
Belt splices
Density control Hydraulic
Bale size indication Electronic display on monitor
Bale Shape

Regular pickup

Type
Width Inside
156 cm
62 in.
Flare
180 cm
71 in.
Drive
Bars Four
Number of teeth 96
Tooth spacing 6 cm
2.6 in.
Lift control Adjustable height control
Gauge wheels Semi-pneumatic
Stripper diameter 25.4 cm
10 in.
Knives

MegaWide Plus pickup

Type
Width Inside
196 cm
77 in.
Flare
221 cm
87 in.
Drive
Bars
Number of regular teeth 120
Number of mega teeth Eight
Tooth spacing
Lift control
Gauge wheels Semi-pneumatic
Stripper diameter
Knives

High-capacity pickup

Type MegaWide High Capacity and Cutting (HC
Width Inside
196 cm
77 in.
Flare
221 cm
87 in.
Drive
Bars
Number of middle teeth 120
Number of mega teeth Eight
Tooth spacing
Lift control
Gauge wheels Semi-pneumatic
Stripper diameter 25.4 cm
10 in.

Wrapping system

Control Automatic to preset to bale size
Type Standard
Electric
Twine arms Two
Twine ball capacity Eight
Bale chamber
Wrapper

Monitor

Monitor console for tractor
Gate closed Symbol on monitor
Bale forming G5e
Bale size Mechanical and digital
Near full bale Audible, adjustable alert
Full bale Audible, adjustable alert
Twine arm position Indicator Mechanical
Auto wrap Activates when bale reaches preset size
Oversize bale Yes, audible and mechanical alerts

Surface wrap

Available

Tire size

Standard Dry and Precutter - High-flotation 14 L - 16.1, 8 PR
Silage - XL high-flotation 21.5L-16.1, 8 PR
Optional With MegaWide Plus

Driveline

Drive protection Slip clutch
PTO speed 540 or 1,000 rpm
Type Constant-velocity (CV)
PTO lockback collar on tractor hookup Yes
PTO 60-degree free rotation Yes

Tractor Requirements

Minimum PTO Dry Hay and Silage - 42 kW
55 hp
HC 93 kW
125 hp
Hydraulic SCV valves One tractor selective control valve (SCV) is required when baler is equipped with electric twine wrap.
Two tractor SCVs are required when baler is equipped with hydraulic twine wrap.
Three tractor SCVs are required when baler is equipped with hydraulic twine wrap and a hydraulic pickup lift.

Silage baler features

Starter roll scraper
Powered scraping auger
Spirals on gate roll
Pre-cutter/slicer

Additional information

Maintenance chains
Date collected 22-Aug-2023