The Ranch Zone
King Ranch Ag & Turf
The Ranch Zone
Search Our Inventory: Row Crop Tractor
Search Our Inventory: John Deere 5075E
Search Our Inventory: Skid Steers
Search Our Inventory: John Deere 8370R
Search Our Inventory: Frontier Rotary Cutter
Search Our Inventory: Cotton Picker
Search Our Inventory: Lawn Mower
Search Our Inventory: John Deere Gator
Search Our Inventory: Tillage
Search Our Inventory: Zero-Turn Mower

John Deere 451E Round Baler

Model Photo

451E

  • Integrated net lift assist for easier loading of net wrap
  • Net hood lighting for better visibility in low-light conditions
  • Baler display with customizable user interface
  • Regular pickup

 

Features

Regular pickup offers large feed opening and low-profile, mid-mounted pickup

Regular pickup on 451E Baler with converging wheels Regular pickup on 451E Baler with converging wheels

Mounted in front of the baler wheels and directly below the bale chamber, the pickup hugs the ground for clean crop retrieval. Hay movement is minimized.

  • V-belt driven
  • 451E Baler pickups are 116.6 cm (45.9 in.) wide
  • Large reel shaft and reel bearing

The small-diameter, low-profile pickup allows for good ground gauging and clean crop retrieval.

  • Handles large, heavy windrows of hay and high-moisture crops
  • Feeds hay directly to the forming chamber to reduce crop loss
  • Low-profile pickup minimizes hay lift to reduce chaffing and retain hay quality

Side flares prevent hay from blowing off the pickup ends, which reduces hay loss.

The closely-spaced pickup teeth extend to the baler side sheets to help build straight-edged bales.

Standard on regular pickups, compressor rods are contoured to control hay over the pickup radius for positive feeding. The compressor rack can be adjusted upward or downward to match the volume of material in the windrow and can be easily removed to match crop conditions.

Adjustable crank handle Adjustable crank handle

The adjusting crank positions the pickup to the desired operating height to match crop or field conditions.

An optional hydraulic pickup lift cylinder is available as an attachment.

  • Makes raising for transport or clearing obstructions easy
  • Crank handle serves as a down stop
  • Adapts to regular and MegaWide™ Plus pickups

Automatic electric-tie option using G5e monitor allows for more productivity

Audible alarm
G5e monitor-controller G5e monitor-controller

The G5e monitor-controller is included with the automatic electric twine tie option and the Edge-to-Edge net wrap option on the 451E Baler. The monitor sounds an alarm for near-full, full, and oversized bales.

  • Monitor beeps once to notify the operator to even-up the bale prior to reaching the desired size.
  • Monitor beeps twice when the bale reaches the desired size.
    • If the operator continues to feed hay into the baler, the monitor will sound continuously to warn of an oversized bale.
  • Bale shape bars are in base on the 451E Round Balers.
  • The 451E Round Balers allow for adjustment of twine settings from the cab by using the G5e monitor.
  • The number of wraps on the Edge-to-Edge net wrap option on the 451E can be set with the G5e monitor.

The audible level of the monitor can be adjusted.

G5e external speaker

G5e External Speaker Device G5e External Speaker Device
G5e External Speaker Device G5e External Speaker Device

The G5e External Speaker is an optional attachment for G5e displays only.

  • Provides increased volume levels for all G5e display notifications
  • Assist baling operations in situations with high in-cab noise or for operators with hearing impairments
  • Installed externally on harness for easy access
  • Omits sound separate from G5e display speaker to increase volume up to 16 percent
  • Manually adjust volume by turning front dial left or right

The external speaker device provides increased volume levels for all G5e display notifications. It will omit a sound separate from the G5e display to assist baling operations in situations with high in-cab noise or for operators with hearing impairments. It is installed externally on the harness and can have volume levels changed by manually turning the front dial left or right. Adding the external speaker increases G5e notification volume by 16 percent. The external speaker is optional and is available as an attachment.

Adjustable hitch to match wide array of tractor drawbar heights

Side view of adjustable hitch Side view of adjustable hitch
Front view of adjustable hitch Front view of adjustable hitch

The 1 Series Round Balers came standard with an adjustable hitch. This feature allows the hitch height to be adjusted to optimize crop-feeding performance. Due to the wide array of tractor tire sizes and drawbar heights, hitch adjustment may be necessary to get the proper feed opening of the baler. The adjustable hitch eliminates the need for the 51-mm (2-in.) thick tractor drawbar kit (AE57344) because it has a wider opening.

Benefits of the adjustable hitch:

  • Ability to match baler to numerous tire sizes
  • Allows for drawbar height to fall within 330 mm to 559 mm (13 in. to 22 in.) from the top of the drawbar to the ground
  • Eliminates narrow feed opening on the baler which can cause plugging
  • Allows pickup head to follow terrain without missing crop

All eight bolts must be used when adjusting the hitch. There are four different positions as shown below:

Position 1 (top) (factory setting) - regular pickups Position 1 (top) (factory setting) - regular pickups
Position 2 Position 2

Vertical forming chamber maintains uniform bale density

Bale-starting diagram Bale-starting diagram

As the hay enters the forming chamber from the pickup, belts immediately turn the hay to form a tight, dense core.

Incoming hay then feeds between the bale and the lower gate roll. Hay is tightly compressed into smooth, dense layers as it enters the bale.

Chaffing is greatly reduced to prevent loss and retain hay quality in the bale.

Full-sized bale in bale chamber Full-sized bale in bale chamber

The idler arm rises with bale growth, forcing oil from the hydraulic cylinder through a pressure-relief valve to maintain uniform bale density throughout the bale-forming process.

Exclusive DiamondTough™ belts with plate-type splices

Staggered belts Staggered belts

John Deere's 178-mm (7-in.) wide diamond-tread design ensures fast bale starts and grips the bale to prevent slippage and reduce chaffing. The treads are self-cleaning to reduce carryover. The belts are staggered to reduce the loss of fine material and are closely spaced to contain the hay for fast, easy starts.

The belts enclose 91 percent of the bale width to reduce loss of fine material and retain hay quality.

The staggered belt roll design enables any loose hay under or behind the belts to be returned to the pickup and into the baler. This design helps to prevent buildup at the front of the baler, which could cause hay loss and belt or splice damage.

DiamondTough triple-weave belts DiamondTough triple-weave belts
#

Every baler in the 1 Series Family uses DiamondTough belts. Belts are constructed using a patented triple-weave process of nylon and polyester materials.

They have the strength to handle heavy shock loads and help maintain consistent belt length.

The DiamondTough belts are more puncture and tear resistant than other belts on the market and provide improved belt life and reliability.

Plate-type fasteners
Plate-type splices Plate-type splices
#

All of the 1 Series Balers use the plate-type fasteners.

This closed-loop design uses a plate fastener with pre-assembled rivets that lock the fasteners into the belt, providing a powerful vice-type grip on the belt.

  • The plates and rivets are manufactured from high-tensile stainless steel.
  • Strong belt splices mean less maintenance and more productivity.
  • The loop area is cold forged, making it extremely wear resistant in the coupling area, resulting in a very long cycle life.
  • The spring steel pin is notched and locks into the splice connection without having to bend the pin or use external retainers.

Key Specs

Belts-other - width 17.8 cm
7 in.
Density control Hydraulic
Bale size indication Not available from factory, available as dealer-installed options
Regular pickup - Bars Four
Regular pickup - Number of teeth 72
Regular pickup - Tooth spacing 6 cm
2.6 in.
MegaWide Plus pickup - Number of regular teeth
MegaWide Plus pickup - Number of mega teeth
High-capacity pickup - Number of middle teeth
High-capacity pickup - Number of mega teeth

Bale

Size Diameter
89 - 152 cm
35 - 60 in.
Width
117 cm
46 in.
1.2 x 1.5 m
4 x 5 ft
Weight Full-size bale in dry crop
454 kg
1,000 lb

Baler

Base weight
Weight Shipping - 1,701 kg
3,750 lb
Length Gate closed
361 cm
142 in.
Gate open
455 cm
179 in.
Height Gate closed
260 cm
102 in.
Gate open
325 cm
128 in.
Width With standard tires
226 cm
89 in.

Bale forming

Forming chamber
Belts-other Number
Six
Width
17.8 cm
7 in.
Texture
Diamond Tread friction surface belts
DiamondTough, triple-weave, single-ply belts
Enclosed percent of bale surface
Belt splices
Density control Hydraulic
Bale size indication Not available from factory, available as dealer-installed options
Bale Shape

Regular pickup

Type
Width Inside
117 cm
46 in.
Flare
141 cm
56 in.
Drive
Bars Four
Number of teeth 72
Tooth spacing 6 cm
2.6 in.
Lift control Adjustable height control
Gauge wheels Semi-pneumatic
Stripper diameter 25.4 cm
10 in.
Knives

MegaWide Plus pickup

Type
Width
Drive
Bars
Number of regular teeth
Number of mega teeth
Tooth spacing
Lift control
Gauge wheels
Stripper diameter
Knives

High-capacity pickup

Type
Width
Drive
Bars
Number of middle teeth
Number of mega teeth
Tooth spacing
Lift control
Gauge wheels
Stripper diameter

Wrapping system

Control Automatic to preset to bale size
Type Standard
Electric
Twine arms Two
Twine ball capacity Four
Bale chamber
Wrapper

Monitor

Monitor console for tractor
Gate closed Symbol on monitor
Bale forming
Bale size Mechanical
Near full bale Audible alert
Full bale Audible alert
Twine arm position Indicator Mechanical
Auto wrap Activates when bale reaches preset size
Oversize bale Yes, audible and mechanical alerts

Surface wrap

Available

Tire size

Standard 11 L - 14
Optional

Driveline

Drive protection Shear-bolt
PTO speed 540 rpm
Type Constant-velocity (CV)
PTO lockback collar on tractor hookup No
PTO 60-degree free rotation No

Tractor Requirements

Minimum PTO Dry Hay and Silage - 42 kW
55 hp
Hydraulic SCV valves One tractor selective control valve (SCV) is required when baler is equipped with electric twine wrap.
Two tractor SCVs are required when baler is equipped with hydraulic twine wrap.
Three tractor SCVs are required when baler is equipped with hydraulic twine wrap and a hydraulic pickup lift.

Silage baler features

Starter roll scraper
Powered scraping auger
Spirals on gate roll
Pre-cutter/slicer

Additional information

Maintenance chains
Date collected 22-Aug-2023