The Ranch Zone
King Ranch Ag & Turf
The Ranch Zone
Search Our Inventory: Row Crop Tractor
Search Our Inventory: John Deere 5075E
Search Our Inventory: Skid Steers
Search Our Inventory: John Deere 8370R
Search Our Inventory: Frontier Rotary Cutter
Search Our Inventory: Cotton Picker
Search Our Inventory: Lawn Mower
Search Our Inventory: John Deere Gator
Search Our Inventory: Tillage
Search Our Inventory: Zero-Turn Mower

John Deere 1200H Hydro Bunker & Field Rake

Model Photo

1200H Hydro

  • Fuel efficiency at speeds up to 10 mph
  • Standard 72-inch rear rake enables rapid coverage
  • Adjustable seat and wide running boards
  • Stylish rear body

 

Features

Drive system

Drive system Drive system

The hydrostatic 3WD system has variable speed for excellent pulling and pushing power.

Engine

Raising the hinged rear fiberglass body cowling exposes the 16-hp*(11.9-kW), 479-cc air-cooled, overhead valve engine:

  • High torque for pulling power
  • Fuel efficient for lower operating cost and extended operating range
  • 3.9 gal (14.8 L) gas tank for long hours of operation with unleaded gasoline
  • Full pressure lubrication and oil filter for good reliability
  • Low vibration for long component life and operator comfort

 

*At 3600 rpm. Engine manufacturer gross power per SAE J1940. Tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to the engine manufacturer’s website for additional information.

Heavy-duty air filter protects engine in tough conditions

A heavy-duty air filter is standard equipment on the 1200A Bunker and Field Rake.  Featuring a cyclone design, this dual element filter can eject 90 percent to 95 percent of dust particles before they reach the paper element core.  This reduces overall maintenance costs through less cleaning and replacement.

Wide tires and wheelbase

Wide tires Wide tires

Wide high-flotation tires provide low ground compaction.

  • All tires are 22x11.00x8 NHS

 

The 47-in. (119-cm) wheelbase enables a tight turning radius.

Operator's platform designed for operator comfort

Operator's platform Operator's platform

The operator's platform is designed for comfort, control, and high productivity:

  • 14-in. (35.56-cm) diameter steering wheel with a 10-to-1 gear ratio for easy and responsive steering
  • Adjustable for and aft for improved comfort for large and small operators
  • Wide running boards for comfortable leg support of large and small operators alike

Instrumentation is convenient and easy to use

Instrumentation and controls Instrumentation and controls

Instruments and electronic controls are positioned for easy reach and visibility:

  • Ignition switch and key start are mounted on the console for quick and easy starting.
  • Choke control for quicker cool weather starts is conveniently located on the console at left.
  • Standard rear and mid implement lift lever is located on the right side for easy access.

Foot controls

Foot controls Foot controls

The forward and reverse foot pedals provide ease of identification and operation. The forward pedal is larger than the reverse pedal and provides good clearance for the operator's foot. This is the same two-pedal design used on the  John Deere 2500A Riding Greens Mower.

Key Specs

Transmission type Hydrostatic with 3 hydraulic wheel motors
Ground clearance @ rake attachment 241 mm
9.5 in.
Travel Speed (forward or reverse) Reverse: 6 km/h
4 mph
Forward: 0-10 mph
16 km/h
Tank capacity 14.8 L
3.9 U.S. gal.
Displacement 480 cc
29.3 cu in.
Engine type Air-cooled
Horsepower At 3600 rpm: 11.9 kW
16 hp
Engine Manufacturer Gross Power per SAE J1940. Tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to engine manufacturer's website for additional information.

Engine

Manufacturer
Type Air-cooled
Displacement 480 cc
29.3 cu in.
Horsepower At 3600 rpm: 11.9 kW
16 hp
Engine Manufacturer Gross Power per SAE J1940. Tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to engine manufacturer's website for additional information.
Compression ratio 8.5:1
Lubrication Full pressure
Oil capacity Without filter: 1.4 L
1.5 U.S. qt
Oil filter Standard
Spark arrester muffler Standard
Idle speed Low speed: 1,750 rpm
fast idle speed (low load): 3,100 rpm

Electrical System

Type 12 V
20 amp
Battery 500 CCA
12 V
Starter Electric
Ignition Transistor type
Light kit Available

Fuel System

Tank capacity 14.8 L
3.9 U.S. gal.
Fuel pump Diaphragm-type
Fuel required Unleaded gasoline

Transmission

Type Hydrostatic with 3 hydraulic wheel motors
Fluid capacity 12.2 L
12.9 U.S. qt

Travel Speed

Forward or reverse Reverse: 6 km/h
4 mph
Forward: 0-10 mph
16 km/h

Brakes

Type Dual rear wheel parking brakes; dynamic braking provided by closed loop hydrostatic powertrain

Steering

Type Chain drive steering wheel with 10-to-1 gear ratio: 35.6 cm
14 in.

Tires

Front One 22x11x8 NHS 34.5 kPa
5 psi
Rear Two 22x11x8 NHS 34.5 kPa
5 psi

Dimensions

Width 187 cm
73.5 in.
Height 114 cm
45 in.
Length 216 cm
85 in.
Wheelbase 1193.8 mm
47 in.
Ground clearance @ rake attachment 241 mm
9.5 in.
Turning radius Zero
Weight (approx.) 404 kg
890 lb
Rear-hitch towing capacity

Attachments

Rake
Cultivator
Front blade
60-in. aluminum front blade
Articulating front-mount core-removal blade
Wide- and narrow-interval scarifier tines attachment
Mid-mount 64.5-in. (164.9 mm) scraper blade attachment
Rear-mounted 60-in. field finisher
Hydraulic pump package

Sound Levels

Operator ear 76 dBA
Measuring standard ISO 11201
Attachments installed

Additional information

Date collected