• Honda 25cc mini 4-stroke engine
• Runs on straight, unleaded gas (no mixing)
• 17" Semi-matic (bump feed) head with Ultra Quiet® line
Easy starting, 4-stroke Honda engine
The Honda Quick Start system offers a quick, easy start. No hassle. No fuss. Every time.
Runs on regular gas - no mixing!
Honda's 25cc mini 4-stroke engine runs on straight, unleaded gas. No need to mix gas and oil!
Quick acceleration and excellent torque for demanding jobs
Designed to take on thick grass and heavy brush without bogging down. Strong low-end torque characteristics allow many jobs to be performed at partial throttle, increasing fuel efficiency.
Fuel efficient design
Highly fuel efficient design costs less to operate - up to 50% less than a two-stroke trimmer!
Comfortable loop handle design
Vibration dampening design makes the HHT25SLTA more comfortable to operate.
Durable flex shaft with limited lifetime warranty
Flex shaft with limited lifetime warranty for increased durability and superior shock absorption
Deflector designed to provide increased operator visibility
Equipped with an automatic line cutter.
Solid trigger design for increased durability
17" Semi-matic bump feed head, with Ultra Quiet® line
Ultra Quiet® line significantly reduces the trimmer's noise level.
Lightweight - only 13.1 lbs!
The HHT25SLTA is Honda's lightest trimmer, thanks in part to the use of the world's lightest 4-stroke 25 cc engine.
Less smoke and odor
4-strokes don't burn oil like a two-stroke engine. Which means there's less smell and no smoke - and less headache for you.
Ergonomically designed and positioned controls
Balance and maneuverability are superb due to the optimization of the engine’s center of gravity, as well as the location of the throttle assembly and loop handle.
Lower vibration for more comfortable operation
The GX25 creates less vibration than comparable engines to minimize operator fatigue.
Use and store in any position
Unique 360 degree inclinable engine can be used and stored in any position.
Harness included
Can accommodate a variety of 9" cutting blades with optional barrier kit
Engine | GX25 |
Displacement | 1.53 cu. in.(25cc) |
Fuel | Unleaded Gasoline (86 Octane or higher) |
Fuel Tank Capacity | 16.9 fl.oz. |
Carburetor | Diaphragm Type w/Fuel Pump |
Idle Speed | 3,100 + 200 rpm |
Max.(no load) RPM | 10,000 rpm (without cutting head) |
Dimensions (LxWxH) | 73.5 in. x 12.7 in. x 9.6 in. |
Dry Weight | 12.3 lb (w/o head) 13.1 lb. (with head) |
Engine Stop Switch | Slide Type Switch |
Throttle control | Two Motion Trigger |
Main Pipe Diameter | 1.0 in. (25.4mm) |
Main Pipe Thickness | .06 in. (Aluminum) |
Drive Shaft | Flexible Steel Cable |
Shaft Support | Nylon Support Sleeve |
Gear Ratio | 1.235 |
Handle | Loop Type |
Cutting Head | Semi-matic Feed-Nylon |
Line Type | Ultra Quiet |
Cutting Width | 17" |
Single Harness | Standard |
Double Harness | Optional (must be used with all blade applications) |
Safety Goggles | Standard |
Steel Blade | 9 inch Blade Optional (requires barrier kit) |
Blade Barrier Kit | Optional (must be used with all blade applications) |